And again, CYCLE START to begin the probing routine Now that I've set my work offsets I'm ready to move on to the tool offsets

If I want to see them displayed

So I'm going to go to Handle Jog mode and toggle through the

By pressing the F3 key with the focus on an offset screen

I'm going to talk today about our offset filtering functions

The tool offsets are displayed to the right

More presses toggle through the four position displays just like previous versions of the Haas control

Toggle to the Work Offset page and there's my one work offset

To bring all the offsets back I can press the F3 key

Pressing the OFFSET key changes the focus to the Offset box

This will come in handy when you need to look at all the different drills you have in the machine

Offset...

Offset

Offset

X Offset

Y Offset

It's the same with the new control

X offset

Y offset

X offset

Y offset

Offset X

Offset Y

X Offset

Y Offset

Notice the Tool Offset box is white and the rest of the boxes are colored

When I'm running a CNC program I'm really only interested in displaying the offsets that are active

Pressing the arrow keys immediately begins moving the cursor around this box

Enter the offset number you would like to use for this tool

In the center of the screen is the offset window

Start Offset

End Offset

Archive Offset

Job offset

Vertical Offset

Shadow Offset

The active Program box is displayed in the upper left

With the Finish MRZP Set program run and parameters 1306 through 1308 checked and set as necessary the Rotary Zero Point Offsets have now been properly set and the machine is ready to run xxxxxxxxxxxxxxxxxxxxxxxxxxx

And the active tool information including the graphic image of the tool type taken from the Tool Offset page

With the first tool set, move the turret a safe distance from the probe arm, and index to the next tool

Or, with the door closed, press CYCLE START

Y position offset

Y lens offset

X lens offset

Scale Offset