The clamping force on the part naturally decreases

Clamps

Klump, it's me.

Aluminum jaws are typically used to grip light weight or hollow parts where clamp force is low

You know, you create power, then you tame it. (Music)

get the clamps ready.

He finds a four thousandths of an inch (0.004 , 0.102 mm) space, so he will start by adding a 1 4000 taper to the jaws

In the same direction that you will hold the work piece

And instead of throwing it out, people would think that's a krump move, that's a krump move.

Again we clamp the machined slug at 300 psi and although you might think

Our program is set to cut at the nominal part diameter

Andrew cuts the taper in the jaws With the taper cut and the work piece clamped at full pressure

Shlubb and Klump were packing an arsenal.

The jaws will deflect away from the part

I tell them to create a ball, and then you just use that ball of energy.

The boring ring is now clamped at the center of the stroke

But don't exceed the manufacturer's specifications

The result would be jaws that have very little travel remaining to grip the part, past the nominal diameter

Counter clockwise, to bring the adjustable dowels inward slightly

As you look at your setup, visualize the direction you will be clamping in

To do this, unclamp the jaws and rotate the threaded body of the boring ring to adjust the position of the grippers

Height

Height

height

Image height

To start, press tool release to unclamp the drawbar

These slide along the slotted ring body during adjustment

Now Andrew uses a slow drying bluing compound to check if he needs to make another slight taper cut

Height 1

Height 2

Height 1

Height 2

lt's awfully good.

I'm fine.

Coolest.

Good. God.

Yes.

Its height going to be f of x,1.

So if we wanted to calculate the volume, what would it be?

So the area of a rectangle is just the width times the height.

The air line must have an inner diameter of at least 1 2 (13mm), all the way from the source to the machine

Window height

Determines the standard text color.

View height

The main window's height.