"ネジ首バイアル"の翻訳 英語に:


  辞書 日本-英語

ネジ首バイアル - 翻訳 :

  例 (レビューされていない外部ソース)

調達またはマシン レベルを低くこと バブルのバイアル中心まで ネジを調整します
Check whether the LEFT FRONT leveling screw needs to be raised or lowered to bring the machine level
均等にバイアルのセンターに バブルをもたらすには前面または背面ネジを調整します
Once again, check that the level tool edge lines up visually with a T slot edge
いっぱいネジ無いの 心のネジ
He's missing screws too, screws for his heart.
ネジって
Screws?
心のネジ...
Screws for my heart.
歯車やネジやボルト
You can do bigger things.
ネジを巻くフリを
Pretend that you are winding me up anyway.
ネジ穴に合わせ ハングアップする場所で パネルし ネジを締めます
Detach the panel from its mounting brackets, just as before
ネジを巻いておく
You need winding?
ネジが緩んでるぞ
He's got a screw loose.
真ん中のネジを使用して調整を行う 覚えて ネジの移動のみ
If the measurement shows there is bow in the base casting in either the up or down direction use the middle screws to make adjustments
チップ コンベア側のネジで始まる
Detach the left side panel first
6台を ネジなしで壁に
This is a spider mite.
ネジを巻けば分かるわ
I'll wind him up and we'll see.
飛行士 どのネジだって
Astronauts! Which one is Tsapa here?
シロ いっぱいネジ無いの
White is missing lots of screws.
四角穴用のネジ回しよ
You need a Robertson screwdriver.
あなたはバイアルを持ち 注射器を持ち歩きます
Now, carrying this thing around is complicated.
今 ネジ上 下へを締めます
Hang the panel by aligning the drop out holes with the screws
考える ネジが切れたのよ
His brain's ran down.
短いの平準化バイアルを y 軸に短いバイアル並列角度測定 バックアップするマシンの前面 どちらかのリフトまたはのベース バックアップは 必要に応じてキャスト
With the leveling tool at the center of the table and the short leveling vial parallel to the Y axis, the shorter vial is measuring the angle of the machine front to back
トムは頭のネジが飛んでいる
Tom is crazy.
動く のネジが切れたんだわ
His action must have run down.
頭のネジを回してやろうか
Well, screw you twice.
残りの中間をタイトなネジします
Set each screw by tightening an additional 10 degrees
最後の一本のネジに至るまで.
Every last bolt.
4 本のネジで枠を取り付けます
And tonight, you'll be able to see the device in the tent.
トックさん 動く のネジも巻きますね
If you don't mind, Mr Tok, I'll wind up your action.
 ネジを付けなおしている  そうか
He moved the screws to rehang it.
南に向かえば ネジはあっち向き
When you're going south, it screws that way.
クロの無い所のネジ シロが持ってる
I gots all the screws Black needs!
y 軸に平行の精密バイアル オペレーター側のバブルの位置を見てください
Place the Leveling Tool in the center of the Mill Table with the precision vial parallel to the Y axis
2 つの 4 本のネジで パネルの左側に続いてください 最後のスロットに固定 2 本のネジを残す
Start with the screws on the chip conveyor side followed by two of the four screws on the left side of the panel
ドラゴン族の首領の首もだ
And the Dragon leader's head.
首ね...
Your neck.
首に
His neck.
足首
My ankle?
首相?
Prime minister?
首か
I'm fired?
首に?
Your neck?
ネジを ドロップ アウト 穴を合わせ パネルをハングします
The panel can now be lifted away from the bracket position and installed on the left side of the machine
同量の両方のネジを回し 機械今レベルで
Again, lift the lowest side of the machine to bring it level and turn both screws an equal amount
なんて事 動く のネジが切れちまった
Oh, dear. My action has run down.
僕がネジを回すと水が吹き出してきた
When I turned the screw, water burst out.
各フレームの側のプレートを 2 本のネジをインストールします
Raise the upper enclosure frame to its extended position

 

関連検索 : バイアルの首 - ネジ首 - 首のネジ - バイアル - バイアル、シリンジ - のバイアル - 注射バイアル - 用量バイアル - 反応バイアル - バイアルのラベル - 液体バイアル - 試薬バイアル - 薬物バイアル - ネジ