Clamps

Klump, it's me.

And instead of throwing it out, people would think that's a krump move, that's a krump move.

You know, you create power, then you tame it. (Music)

These are halfpin barrel hinges.

This body uses hinge joints in the knees and elbows.

get the clamps ready.

He finds a four thousandths of an inch (0.004 , 0.102 mm) space, so he will start by adding a 1 4000 taper to the jaws

These slide along the slotted ring body during adjustment

The clamping force on the part naturally decreases

Andrew cuts the taper in the jaws With the taper cut and the work piece clamped at full pressure

Shlubb and Klump were packing an arsenal.

I tell them to create a ball, and then you just use that ball of energy.

The result would be jaws that have very little travel remaining to grip the part, past the nominal diameter

Counter clockwise, to bring the adjustable dowels inward slightly

Starred

As you look at your setup, visualize the direction you will be clamping in

To do this, unclamp the jaws and rotate the threaded body of the boring ring to adjust the position of the grippers

Superscripts and Subscripts

A banquet?

And lock in place against the ring when the jaws are clamped

This set of short steel jaws was bored to one inch deep while being held at 100 psi

In the same direction that you will hold the work piece

Now Andrew uses a slow drying bluing compound to check if he needs to make another slight taper cut

A widget with tabs

Wrong sex!

I'll throw in lunches.

They have shield generators!

What? Valeting.

With a lime. Okay.

You know this thing has a sleep alarm.

Of lying.

Our program is set to cut at the nominal part diameter

Superscripts and Subscripts

Restricted Overwrite

I bought a camera with its accessories.

The air line must have an inner diameter of at least 1 2 (13mm), all the way from the source to the machine

Superscript

Superscript

Named User

Named Group

Named user

Named group

Grayscale Color Model with Alpha

An option button with text or pixmap label