In this video, we will demonstrate the proper way to cut OD gripping soft jaws and cover soft jaw fundamentals The first side of this bearing housing has been completed

The Proper Way to Cut Soft Jaws Part One OD Gripping Fundamentals

So let's just graph this function, or represent it using their terminology.

Addressee Serializer

So that is my y axis, and this is my x axis.

It's repairable.

Once Z axis is at home, remove the bracket

And so b, I always forget the exact terminology, but b you can call it your semi or the length of your semi minor axis.

So let's graph it.

So I'll just draw this kind of a general graph right here.

Guys, listen. Bearing going out. What do you think?

So that's the real part.

Axes

Scales

Axis

Axes

And then that has to do a lot with like CNC machining, you know.

All right, there we go.

It's going to look something like that.

Vertical Scale

Horizontal Scale

Vertical scale

Horizontal scale

X Axis

Y Axis

Axes labels

x Axis

y Axis

Major Axis

Minor Axis

X Axis

Y Axis

Z Axis

So let's draw this.

It's going to be in the negative quadrant.

This is going to be this function evaluated at c.

This is the horizontal axis over here is the x axis

Let me draw it like this.

The Axes will move to their Home positions

And if you want to care about x, y's, and z's, let's say that this is the z axis.

After an additional reading, we will tilt the front trunnion support to the left or right using the front leveling screws, rotating opposite each other, to align the B and Y axes side to side

You could make the vertical axis.

Let me draw my axes here.

Later we will check and adjust the B axis home position

Timeline