Major Axis

The machine will now function normally

In this case the, focuses are always going to lie along the major axis.

The spindle sweep measurement will show that the spindle axis is perpendicular to the table surface

And all I did is, I took the focal length and I subtracted

The other possibility is that they're out of phase.

Attach the Test Indicator to the Magnetic Base

That's the center.

After adjusting the leveling screw, wait for at least 10 seconds for the bubble to stabilize

Move the spindle head down to the middle of Z axis travel

Rotate both middle screws up to bring them completely off the middle pads

Remember you have to take the square root of both of those.

Remove the shipping bracket holding the door in the open position

If not, it will scan through the list and find the first back up tool that does have life remaining and call that tool to the spindle

So that is my y axis, and this is my x axis.

What's shown on the lower left is set of isophotes for some elliptical galaxy and major minor axis are drawn.

So let's graph it.

So I'll just draw this kind of a general graph right here.

Once Z axis is at home, remove the bracket

So that's the real part.

Axes

Scales

Axis

Axes

Commerce is ancient. Markets are very old.

All right, there we go.

It's going to look something like that.

Vertical Scale

Horizontal Scale

Vertical scale

Horizontal scale

X Axis

Y Axis

Axes labels

x Axis

y Axis

Minor Axis

X Axis

Y Axis

Z Axis

So let's draw this.

It's going to be in the negative quadrant.

This is going to be this function evaluated at c.

This is the horizontal axis over here is the x axis

Let me draw it like this.