Rotate the leveling tool so the precision level is parallel to the Y axis

As is always the case, the middle of the machine needs to be raised so we will adjust the middle leveling screws, using even increments on each side

Someone enters the river and starts to come through straight right on top of us.

We spend so much of our time negotiating red tape,

The same thing I've done with every belt I ever owned.

We'll be executed.

You might imagine that we would fight wars over that box.

Set here the brightness adjustment of the image.

Adjusting row heights...

Then we will check for roll along X axis travel

We are fuckin' back.

The antimatter flow regulators are locked open.

So we must.

Since our indicator reading is one thousandth (0.001 or 0.025mm) over twenty inches (20 or 500mm) we will adjust the B axis to bring it to zero

Auto Brightness

Select the profile of the color space to convert to.

Set here the color saturation correction.

And that's our Series B.

After rough leveling the machine front to back and side to side, we will check for roll along X axis travel

Adjustment

Adjustments

Adjust

That we know of, yeah.

Adjust the volume level

Sir, we're being radarscanned.

So what we do here is we give the target a quick flyover, we adjust the trajectory and then land dead centre.

Driver coils are configured for warp speed.

Art breaks the monotony of our life.

Nothing very serious.

How is it that the colony manages to adjust the numbers of workers performing each task as conditions change?

Fine

Adjust Curves

Adjust Curve

Curves Adjust...

Fine angle

HSL Adjustments

Scaling

Smooth scaling

Adjust Size

Now we will check the parallelism of the table surface to Y axis in the side to side direction

We are anonymous. We are legion.

It's like tapered to the downside.

Set here the contrast adjustment of the image.

Here, set the strength adjustment of the lens filter.

I'd open questions to the audience.