So, for example, the walls in the Alhambra

And again here are the data points with the solution.

Choose Output to MDl and press WRlTE ENTER . Press MDl and CYCLE START

Here is what I envision to happen.

Handle jogging B axis parallel to the X axis will serve us temporarily until the B axis to Y axis parallelism has been achieved

Now we will check the parallelism of the table surface to Y axis in the side to side direction

So that's my x axis and that is my y axis.

Corner

Location

Jump to Position

Polarization

Positions Rotor

Location

Position

Position

Actions

Place the Leveling Tool in the center of the Mill Table with the precision vial parallel to the Y axis

That's the vector in standard position.

Let me put the Laplace transform of and I'm also going to the sides.

Text position

Dock position

Position x

Text Position

Position Angle

Position X

Position Y

Home location

Barcode Position

What's the position?

Position.

Can you locate it?

Enough to get a GPS fix?

Since our indicator reading is one thousandth (0.001 or 0.025mm) over twenty inches (20 or 500mm) we will adjust the B axis to bring it to zero

Relative position

Focal point

Bookmark Track Position

Log widget position

Save Position

Position of columns

Tab bar position

Absolute

Title alignment

Text position

Reset Position

Label position