"電圧設定"の翻訳 英語に:
辞書 日本-英語
電圧設定 - 翻訳 :
例 (レビューされていない外部ソース)
電源の設定 | Power Settings |
電源管理を設定... | Configure Power Management... |
圧力のグリップ部分を設定するとき | We will address that scenario in another video in this series |
ドライバーまたは電圧計を検出電圧 開始制御キャビネットでと特定はないです | A phillips screwdriver and a voltage sensing screwdriver or volt meter |
CUTIE 電流の電圧は | Cutie current under tension is... |
変圧器で電圧がないことを確認 ちょうど撮影相相電圧の測定値の平均を使用します | If the values are good, make sure the Machine Circuit Breaker is in the OFF position and check that there is no voltage at the Transformer |
トランスの電圧がないことを確認 だけの相相電圧の測定の平均を使用します | If the values are good, make sure the machine circuit breaker is in the off position and check that there is no voltage at the transformer |
高電圧フェンスだ | Electrified perimeter. |
電流の電圧は 同じ か | Current under tension is equal? |
電流の電圧は 高価 か | Current under tension is expensive? |
100 Psi を締め金で止める圧力を設定します | Right where they need to be to cut these jaws We set the clamping pressure to 100 psi |
ディスプレイの明るさ サスペンド 電源プロファイルの設定Comment | Display brightness, suspend and power profile settings |
電流の電圧は 広がる か | Current under tension is expandable? |
設定 ショートカットを設定... | Settings Configure Shortcuts... |
設定 ツールバーを設定... | Settings Configure Toolbars... |
設定 kappname を設定... | Settings Configure kappname ... |
設定 バックエンドを設定... | Settings Configure Backends... |
設定 okular を設定... | Settings Configure okular ... |
設定 フィルタの設定... | Settings Configure Filters... |
設定 ショートカットを設定... | Settings Configure Notifications... |
設定 kmail を設定... | Settings Configure kmail ... |
設定 ショートカットを設定... | Options Request Disposition Notification |
設定 通知を設定... | Settings Configure Notifications... |
設定 POPフィルタの設定... | Settings Configure POP Filters... |
電圧を上げよう | I'm going to have to increase the voltage. |
この平均の数と一致する 変圧器のタップの位置設定 T5 変圧器に移動します | Use the average of the Phase to Phase voltage measurements just taken and set the Transformer Tap position to match this average number |
連絡先の電話番号を設定します Street address | Set here the contact'phone number. |
kmail の設定ウィンドウで kmail の各種設定が行えます 設定 kmail を設定... で設定ウィンドウを開けます | kmail 's configuration window enables you to configure kmail in many ways. You can reach it via Settings Configure kmail .... |
kmail の設定ウィンドウで kmail の各種設定が行えます 設定 kmail を設定... で設定ウィンドウを開けます | Queued messages will only be sent if you select File Send queued messages. |
kmail の設定ウィンドウで kmail の各種設定が行えます 設定 kmail を設定... で設定ウィンドウを開けます | Queued messages will be sent after all checks for new mail, ie after automatic mail checks as well as after manual mail checks. Of course, you can also manually send the queued messages with File Send queued messages. |
kmail の設定ウィンドウで kmail の各種設定が行えます 設定 kmail を設定... で設定ウィンドウを開けます | Enable this option if you want to be asked for confirmation whenever you use Folder Move All Messages to Trash. |
バッテリーを組み込み 低圧電流で動かし 円筒コイルで定位置に固定します | You know, standardized platform with the motors and the battery when it operates, |
あなたの電話に関する設定のまとめです これらの設定項目は デバイスの設定ダイアログでいつでも変更できます | This is a summary of the settings that are associated with your phone. You can always fine tune these settings later in the device configuration dialog. |
設定 | settings |
設定 | Systemsettings |
設定 | set |
設定 | configure |
設定... | Configure Filters... |
設定 | Mask Settings |
設定 | Animation |
設定 | Configuration for |
設定 | Long skip duration |
設定 | Modulation |
設定 | Configuration |
設定 | Duration |
関連検索 : 電圧設定点 - 出力電圧設定 - 定電圧 - 設計電圧 - 設定圧力 - 設定圧力 - 設定圧力 - 圧力設定 - 圧縮設定 - 設定圧力 - 電圧安定 - 電圧測定 - 定電圧ドライバ - 定電圧レギュレータ