To Cutters?

Now, stand over there. ( tense theme playing )

Now that I've defined my group, it's time to incorporate this group into my CNC program

Archer to Tucker and Reed.

Cora. Don't move.

Regardless of which tool ends up in the spindle

Young and cocky, good cutter.

Think of the bolt cutters as an investment.

To get to the optimizer window, I press the F4 key

Everything came in plastic, in cardboard.

And now as I run this program over and over

Cutter's a farm. Small house, close to the road.

G43 H23 gets replaced with G43 H1023

Well, you go that way and come to Cutter's and turn left.

Now I have offset filtering enabled

Except that we have added this column for tool type in the Tool Offset box

I am going to talk today about our new Program Optimizer function

Now that I've run the first part and made my override changes

These changes are captured on the fly and I can come back at the end and incorporate them in the CNC program

In this video, we will show you how to use the automatic tool presetter option for Haas CNC turning centers

We wanted to be able to make anything on any length scale, all in one place, because you can't segregate digital fabrication by a discipline or a length scale.

For example, this program uses four tool offsets and one work offset

The good news, for what it's worth, is after Sergio and 21 others were killed that day in the attack on the U.N., the military created a search and rescue unit that had the cutting equipment, the shoring wood, the cranes, the things that you would have needed to do the rescue.

Sometimes it's purchased directly from the machine tool supplier but usually its purchased from, and installed by a third part integrator

The Haas control is capable of holding 200 tool offsets and 105 work offsets but the typical CNC program isn't going to use all of them

And a bookmobile the size of a van with a satellite dish, a printer, binder and cutter, and kids make their own books.