To do this, we program a simple move going to X0 with the tool and offset we'll be using to re cut the jaws Press HAND JOG , press CRNT CMNDS

I put the cursor on the length offset for tool 1

Also on the web, when the text is too small, what you do is hold down the Control key and hit plus, plus, plus.

And we'll see how this prints.

Now all of the objects are grouped on various layers.

Press the friggin' button damnit!

On the screen is the notification ARM NOT AT ORlGIN

I'll close down the tray and

With the machine geometry verified, start the Spindle Warm Up program

For a complete list and description of all the functions of list programs and file navigation

Wait for this key to be pressed

When the entries are complete you will receive the Key Code for activating the Machine

When the entries are complete you will receive the key code for activating the machine

Selecting the other text I'll fill them with white.

Make a typewriter sound for each key pressed

More presses toggle through the four position displays just like previous versions of the Haas control

And break detect mode is used to check the cutting face using a pre set tolerance for tool wear

It's the same with the new control

Key Press

So that leaves displays

It'll give you this number.

And these are very easy to calculate on your calculator.

In this case Memory

Let's take a look at that in the browser. Okay so here we are.

She depressed the keys of the piano.

I'll now select all the other objects below 'B7 Pisces'.

Slow keys has been enabled. From now on, you need to press each key for a certain length of time before it gets accepted.

Any tool held in a tool pocket that is in the down position can stay in the pocket

To enable this function I go to the Settings page

Insert closing braces on pressing Enter

I'm going to centre all the objects to the 'B7 Pisces'.

With the advanced editor functions in the Haas control, this couldn't be easier

And I'm going to insert a coolant command

Now, switch the machine's primary breaker to the on position and move to the control panel and press POWER ON

Press Space to continue

Press Space to start a new Game

Press Space to start

Press any arrow key to start

Press any of your direction keys to start!

When I press the MDl key, I get the same manual data input screen as before

The Shift key has been locked and is now active for all of the following keypresses.

The Control key has been locked and is now active for all of the following keypresses.

The Alt key has been locked and is now active for all of the following keypresses.

The Win key has been locked and is now active for all of the following keypresses.

The Meta key has been locked and is now active for all of the following keypresses.