Pliers.

Pliers.

For pliers!

Clamp.

clamp to ground

Dam and clamp installed?

It got stuck. Got any pliers?

R2, release the docking clamp.

Couldn't you just use a clamp?

You bought me the wrong needle nose pliers though.

After many years of bending gears with a pair of pliers,

A wise businessman knows how to clamp down on costs.

In order to clamp in the desired center of stroke

This is only the beginning of a total clamp down.

But you clamp this thing on my head, and something happens.

Set the pliers over the shielded tab on the end of the chip.

Always be sure to clamp with the jaws against the boring ring

If ever I saw a woman who could use pliers on a man, that's her.

When we clamp this accurately machined slug at 300 psi and check for deflection

Again we clamp the machined slug at 300 psi and although you might think

Well,they could have used a pair of pliers. It's a crude if effective means of extraction.

I don't see anyone who could torture a man to death with pliers and a lit cigar.

We clamp it at the center of the jaws leaving adequate clearance for the cutting path

Connecting the 1 2 hose directly to the hose barb, with a hose clamp, is preferred

Aluminum jaws are typically used to grip light weight or hollow parts where clamp force is low

Keep in mind that there are many situations where you will need to clamp your work piece

We need to clamp OD gripping jaws to just slightly smaller than the work piece outer diameter

When we clamp the demonstration work piece at a pressure of 400 psi, jaw deflection becomes significant

I get a pair of pliers and some coat hangers, and I gather them together in some kind of ropey path.

It is recommended that the 1 2 hose is connected directly to the Hose Barb with a Hose Clamp

During jaw cutting, clamp the jaws with a force as close as possible to your planned part gripping force

We will use our part to set the initial position of the jaws as they clamp the boring ring

Both of you pull it out of your butts right now or I grab a flashlight and some pliers and go exploring.

At 250 psi clamp pressure, our part's total indicated run out using the pie jaws is five thousandths (0.005 , 0.127 mm)

So to kind of, I guess, clamp down on things, in April of 1792, the National Assembly created the Committee of

She had a bleeding up in the brain, and that's been fixed with a little stent, a metal clamp that's tightening up the vessel.

She had a bleeding up in the brain, and that's been fixed with a little stent, a metal clamp that's tightening up the vessel.

If your leg is chopped off and you lose blood, your body will clamp down, increase the heart rate, do everything it can to keep your blood pressure up.

But the intention the entire time was, when they have the upper hand, to actually clamp down, reinstate slavery, and take away the civil rights of the freemen of color.

So you can take a bacteria that really doesn't make these things at all, and if you could clamp these on it really well you have it taken off the street.

The way they recycle the boards is that they actually use the coal briquettes, which are used all through China, but they heat up the boards, and with pairs of pliers they pull off all the components.