Open the air inlet valve to supply compressed air to the machine

At the back of the Machine, open the Air Inlet Valve to supply compressed air to the Machine

Our journey did not, in fact, begin at Hercules Inlet, where frozen ocean meets the land of Antarctica.

The rear panels have hanger flanges which allow them to hang on the roof panel flange while they are aligned and screwed in place

Measure from the base casting lower flange and lift the casting four inches (4 or 100mm) off the ground by adjusting the four corner leveling screws to the same height.

And in the process, I became the first person in history to make the entire 650 mile journey, from Hercules Inlet to South Pole, solely on feet, without skis.

Now if you don't have power, or, God forbid, the power cuts out in the middle of a surgery, this machine transitions automatically, without even having to touch it, to drawing in room air from this inlet.

And inspired by my diving at the Azores, It now actually seems that the best shape for these platforms is that of a Manta Ray, by letting its wings sway like a real manta, we can assure contact of the inlet with the surface even in the roughest weather.