Clamp.

Secondary hydraulic failure.

Leak hydraulic fluid.

clamp to ground

Hydraulic failure. Switching to secondary.

There. Through the hydraulic chamber.

Dam and clamp installed?

Any word from the hydraulic chamber?

R2, release the docking clamp.

Wrappings contained minute trace of hydraulic fluid.

Couldn't you just use a clamp?

A wise businessman knows how to clamp down on costs.

In order to clamp in the desired center of stroke

This is only the beginning of a total clamp down.

But you clamp this thing on my head, and something happens.

Always be sure to clamp with the jaws against the boring ring

like looking over a hydraulic system, a propulsion system, an ejection system, a thrust chamber.

The crew member who comes into contact most often with hydraulic fluid is the flight engineer.

When we clamp this accurately machined slug at 300 psi and check for deflection

Again we clamp the machined slug at 300 psi and although you might think

Also denied and eliminated from any further discussion are disc brakes, fuel injection, hydraulic valve lifters, seat belts...

We clamp it at the center of the jaws leaving adequate clearance for the cutting path

Connecting the 1 2 hose directly to the hose barb, with a hose clamp, is preferred

Aluminum jaws are typically used to grip light weight or hollow parts where clamp force is low

Keep in mind that there are many situations where you will need to clamp your work piece

We need to clamp OD gripping jaws to just slightly smaller than the work piece outer diameter

When we clamp the demonstration work piece at a pressure of 400 psi, jaw deflection becomes significant

It is recommended that the 1 2 hose is connected directly to the Hose Barb with a Hose Clamp

During jaw cutting, clamp the jaws with a force as close as possible to your planned part gripping force

We will use our part to set the initial position of the jaws as they clamp the boring ring

It means large scale hydraulic fracking for gas and massive strip mining operations for coal, the likes of which we haven't yet seen.

At 250 psi clamp pressure, our part's total indicated run out using the pie jaws is five thousandths (0.005 , 0.127 mm)

So to kind of, I guess, clamp down on things, in April of 1792, the National Assembly created the Committee of

If your high pressure hose pipe or hydraulic line bulges a little, you just wrap some tape around it, it really is that simple.

She had a bleeding up in the brain, and that's been fixed with a little stent, a metal clamp that's tightening up the vessel.

She had a bleeding up in the brain, and that's been fixed with a little stent, a metal clamp that's tightening up the vessel.

If your leg is chopped off and you lose blood, your body will clamp down, increase the heart rate, do everything it can to keep your blood pressure up.

But the intention the entire time was, when they have the upper hand, to actually clamp down, reinstate slavery, and take away the civil rights of the freemen of color.

So you can take a bacteria that really doesn't make these things at all, and if you could clamp these on it really well you have it taken off the street.

So, this is the capery where you get fitted for your cape, and then you walk up these three steel graded steps and then we turn on three hydraulic fans from every side and then you can see the cape in action.