Andrew cuts the taper in the jaws With the taper cut and the work piece clamped at full pressure

The clamping force on the part naturally decreases

Now Andrew uses a slow drying bluing compound to check if he needs to make another slight taper cut

If he were to use regular soft jaws to hold this thin walled part

Clamps

To demonstrate a more extreme scenario we move on to these tall 4 inch aluminum jaws

They were bored very deep, at a clamping pressure of only 50 psi

The jaws will deflect away from the part

get the clamps ready.

Klump, it's me.

He's in his 80s and he lives in Florida. He's a tremendous guy.

You know, you create power, then you tame it. (Music)

Andrew mounts an indicator to check how much run out we have, with our part gripped in these jaws

Shlubb and Klump were packing an arsenal.

He finds a four thousandths of an inch (0.004 , 0.102 mm) space, so he will start by adding a 1 4000 taper to the jaws

I tell them to create a ball, and then you just use that ball of energy.

And instead of throwing it out, people would think that's a krump move, that's a krump move.

Bravo will establish a perimeter, then haul ass back to the helo on my command...

The result would be jaws that have very little travel remaining to grip the part, past the nominal diameter

Counter clockwise, to bring the adjustable dowels inward slightly

And here's the peeling action of the Mecho Gecko.

As you look at your setup, visualize the direction you will be clamping in

The good news is with terraforming, there's no more need for pressure suits in the lowland.

These slide along the slotted ring body during adjustment

In the same direction that you will hold the work piece

Lossless PGF files

Lossless JPEG 2000 files

The air line must have an inner diameter of at least 1 2 (13mm), all the way from the source to the machine

To do this, unclamp the jaws and rotate the threaded body of the boring ring to adjust the position of the grippers

Recompress Images...

Compress export file

Compress backup file

Compression

Allow BSD compression

Allow TCP header compression

Use LZO compression

Allow BSD compression

Use TCP header compression

is setting network address

is connected

Show password

Pressure. Pression.

The shields are weakening the clamps, but they're still holding.

But sometimes, carbon based organisms like plants or animals get stuck in the earth.

Compression