John henry raced a steamdrill through a moutain.

This is the ship that I spent the last three months on in the Antarctic.

To fix the stalled harvester.

MineStrike's still loose.

So we drill back in time to see how often that's happened, and exactly how fast that ice can melt.

That's a person down there by the wheel.

The first offshore wells were called whales.

And so what we did was, actually, we made moratoriums on the east and west coasts on drilling.

So, this used to be completely smooth.

Tony said near the backhoe.

A deepwater oil platform near the Indonesian archipelago.

So we collaborated with Egyptian scientists to do coring work, which you see here.

Like Dale City, I suppose?

I'll say this much about a deepsea oil rig... secondworst thing I've ever smelled.

It's a scientific drilling vessel.

Re check both home positions once you have made any adjustments

And we made the very first bore hole through the largest floating ice shelf on the planet.

There's certainly a common theme about needing to make the moment out of this.

She skipped round the fountain garden, and up one walk and down another.

The calibration process is covered on the Haas Service site

No. But I'm gonna do some digging.

Push the RECOVER button

Use the precision level vial parallel to the turret for this measurement

We drilled through a hundred meters of floating ice shelf then through 900 meters of water and then 1,300 meters into the sea floor.

I will bury this world in a grave!!

On a number line, our Total Indicator Reading is three ten thousandths (0.0003 or 0.0076mm) TlR which puts our spindle sweep measurement in specification

This is a crazy thing, this big drill rig wrapped in a blanket to keep everybody warm, drilling at temperatures of minus 40.

The only thing that really reduces the amount of oil that we consume is much higher prices.

Jog the turret to the middle of X axis travel

Press LlST PROGRAM and then select the Memory tab

There was no door there into the other garden, said Mary.

On Y axis Machines such as this one the Security Bracket holding the Wedge in place also needs to be removed

It is also possible that the arm is stuck while gripping a tool that is still clamped in the spindle

Sir, no, sir.

Now, today, synthetic diamonds are used in oil drilling electronics, multibilliondollar industries.

In the State of Texas, they regulate 515 professions, from well driller to florist.

Digging

Dig.

The tool change arm will rotate in reverse and put the tools back into the carousel and spindle

When the coolant tank is full, run each part of the coolant system to check that none of the connections are leaking

But keep material removal to a minimum, to get the most life out of your jaws

There's a ridge right in the middle of the picture, up above where that arrow comes in, that shows you that a little bit.

Below the tool offsets are the work zero offsets

Select program O02020 Spindle Warm up and press SELECT PROGRAM

And the catheters they shoved into me without proper medication made me scream out the way the Earth cries out from the drilling.