Mill.

Shell Mill

They will send us lumber.

like Mill would?

Are you in the lumber business?

Joe's Friendly Gin Mill.

Thank you steel mill.

Here's the gecko mill.

We needed to be working on lumber.

End Mill and Spot Drill

Good lumber is hard to find these days.

All's grist that comes to his mill.

The vessel was loaded with coal, lumber, and so on.

I'm going with Pete to check on that lumber shipment.

There is a water mill above the bridge.

Every miller draws water to his own mill.

There was a water mill below the dam.

He and Darya are going to the mill.

I've been working at a lumber camp just north of here.

Mame uses a coffee mill to grind coffee beans.

The coffee mill that I received does not work.

John Locke Emanuel Kant, John Stuart Mill, and others.

Get us a mill so that we can mill our flour, then we will be able to pay for the rest ourselves.

Them dogs couldn't track a bear through a flour mill.

So, that's the upside. The circular mill is the downside.

The type of tool, type three is a shell mill

The approximate diameter, it's a three inch (3 ) shell mill

This is a textile mill doing synthetic silk, an oil byproduct.

Start with the mill table at the front of the machine

They've taken over the timber industry and been shipping the lumber east, back into China.

And so this is framing lumber, composite materials and it's kind of hard to get the embodied energy out of that, but it can be a sustainable resource if you use FSC certified lumber.

Five megawatt, top of the line Siemens wind mill, takes 10 acres.

The three people who voted for Mill before are familiar with this.

Is it Plato, is it Aristotle, is it Kant, is it Mill?

Mr. Lund, we'll return to this witness. I, uh, had been hired by the Larkspur Lumber Company.

The metaphor that I like to use is the metaphor of the circular mill.

The first guy goes, and you're just in line, and you just kind of lumber to the door.

It just sits in a pile near the sugar mill until eventually they burn it.

John Stuart Mill was a great advocate of this nice guy besides and only been dead 200 years.

It is essentially your ordinary run of the mill protein unless you have pancreatic, ovarian, or lung cancer.

Every Haas mill comes standard with our advanced tool management functions that are very very easy to use

We roast just enough beans for the amount we're going to drink, and grind them in the coffee mill.

Place tool T 2181 on the mill table and monitor the exact position of the bubble on the precision vial

Place the Leveling Tool in the center of the Mill Table with the precision vial parallel to the Y axis

Crabs have this complicated structure under their carapace called the gastric mill that grinds their food in a variety of different ways.