We will address that scenario in another video in this series

We see a total indicator run out of fifteen thousandths (0.015 , 0.381 mm) at 250 psi

Which must be completely profiled on the outside face of the part

This graphic illustrates what would happen if you did not cut to the nominal part diameter

Now we're ready to make our part To demonstrate how uniformly the pie jaws grip the part

He's losing his grip.

We set the remaining values conservatively based on the insert we're using to cut these steel jaws

At 250 psi clamp pressure, our part's total indicated run out using the pie jaws is five thousandths (0.005 , 0.127 mm)

This pulley has sufficient wall thickness to allow us to use standard soft jaws

And we'll keep the spindle speed below the recommended 900 rpm

First, we need to choose whether we'll use aluminum or steel jaws

Remember, spindle speed also affects outside diameter holding force

So we set Diameter to Cut to 3.95 inches

She wanted to dance.

Since the idea is to machine away material to correct the jaw inaccuracies

We need to hold it with internal gripping jaws

We learned about the fundamentals of cutting lathe soft jaws

Conversely, if Andrew were to machine the jaws at a low stroke position

In this video, we will demonstrate the proper way to cut OD gripping soft jaws and cover soft jaw fundamentals

Today we are joined by Andrew, one of our Haas certified technicians

The jaw grippers are now facing outward

Not even where the jaw tips contact the work piece

Instead, Andrew will use this style of boring ring

As speeds increase over 1000 rpm

I hardly knew what to do.

Thank you for watching

Kemp! cried the Voice. Kemp!

He tried to raise his head, and encountered an immovable resistance.

And the additional leverage from the longer jaws can overload and damage the chuck

Later. I will later. East.

All of them, all of them!

west central Borneo

Hiking club's office.

All of it! I said all of it!

I want to tell you everything. Everything.

Mountain Time south Idaho east Oregon

Part of an internal mole hunt.

Mountain Time Alberta, east British Columbia west Saskatchewan

The four places where you saw, that we've never stopped northern Nigeria, northern India, the southern corner of Afghanistan and bordering areas of Pakistan they're going to be the toughest.

I got nothing to fear from you anyway. Lieutenant Gerard to headquarters.

I'm sorry, Ada. Lieutenant Gerard to headquarters.

sir.

How would you like to join the dance club?

He is the manager of the marketing department.

I'm a member of the swimming club.