He's losing his grip.

And we'll keep the spindle speed below the recommended 900 rpm

We will address that scenario in another video in this series

This graphic illustrates what would happen if you did not cut to the nominal part diameter

We see a total indicator run out of fifteen thousandths (0.015 , 0.381 mm) at 250 psi

She wanted to dance.

Which must be completely profiled on the outside face of the part

We learned about the fundamentals of cutting lathe soft jaws

Horizontal

Now we're ready to make our part To demonstrate how uniformly the pie jaws grip the part

Close the sides. Close the sides.

Side scrolling game

Landscape Orientation

Horizontal Lines

Horizontal Scale

Horizontal lines

Horizontal lines

Horizontal Line

Horizontal scale

Horizontal Scroll

Byway

landscape

Size Horizontal

Landscape

Horiz. Line

In this video, we will demonstrate the proper way to cut OD gripping soft jaws and cover soft jaw fundamentals

Scale

Split Horizontal

Landscape

Profile.

The jaw grippers are now facing outward

Not even where the jaw tips contact the work piece

At 250 psi clamp pressure, our part's total indicated run out using the pie jaws is five thousandths (0.005 , 0.127 mm)

This pulley has sufficient wall thickness to allow us to use standard soft jaws

side scrolling shoot'em up arcade game

Yokohama

Next to File Name

Sobel horizontally

Across then Down

Down then Across

So we started doing this.

Take your places.

What? You got wounded?

You're arrogant!

Insolent girl!